HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 80

Diagnostics
23
Configure the HAFM appliance reporting the Duplicate Session
communication problem as a client.
1. At the HAFM main window, click SAN > Logout. The application logs out
2. Type a user ID and password (obtained in
3. Type the IP address of the HAFM appliance running the first instance of
4. Click Login. HAFM opens and the HAFM main window displays.
Did the HAFM appliance reconfigure as a client and did the Ethernet connection
recover?
NO
Contact the next level of support. Exit MAP.
24
The IP address defining the switch to HAFM is incorrect or unknown and must be
verified. A maintenance terminal (PC) and asynchronous RS-232 null modem
cable are required to verify the switch IP address. The tools are provided with the
switch or by service personnel. To verify the IP address:
1. Remove the protective cap from the 9-pin maintenance port at the rear of the
2. Connect the other cable end to a 9-pin communication port (COM1 or
3. Power on the maintenance terminal. After the PC powers on, the Windows
4. At the Windows desktop, click Start at the left side of the task bar. The
82
and the HAFM Login dialog box displays.
page 32, and both are case sensitive).
HAFM in the Network Address field.
YES
The switch-to-HAFM appliance connection is restored and the second
HAFM appliance appears operational as a client. Exit MAP.
switch (a phillips screwdriver may be required). Connect one end of the
RS-232 null modem cable to the port.
COM2) at the rear of the maintenance terminal PC.
desktop displays.
Windows Workstation menu displays.
"MAP 0000: Start MAP" on
Edge Switch 2/24 Service Manual