Quicktools User Interface; Add A New Fabric Dialog Box; Figures 1 Add A New Fabric Dialog Box; Password Change Required Dialog Box - HP StorageWorks SN6000 User Manual

2. The Add a New Fabric dialog box
and password (the default is password).
Figure 1

Add a New Fabric dialog box

3. Click Add Fabric to open the fabric. (If you do not have a secure Ethernet connection, the Non Secure
Connection Check dialog box will prompt you to establish a non-secure connection.)
4. The opening window is displayed
user account password that was initially set up by the administrator
Figure 2

Password Change Required dialog box

NOTE: Until you change the default password, you will be prompted to change the password each time
you attempt to open the fabric.
5. Click OK, and change the user account password. See
more information.

QuickTools user interface

The QuickTools web applet uses faceplate and backplate displays to manage the switches in a fabric. The
interface (Figure
buttons), and data window tabs. The switch faceplate is displayed in the graphic window and shows the
front of a single switch and its ports. While there is no topology display, the fabric name is displayed for
reference in the fabric tree above the switch names. Click a switch name or icon to display a different
switch faceplate in the graphic window. Information displayed in the data windows corresponds to the
data window tab selected.
14 Using QuickTools
(Figure
(Figure
3) consists of a menu bar, fabric tree, graphic window, data windows (some with
1) prompts you for your username (the default is admin)
3). For security reasons, you will be prompted to change your
"Managing user
(Figure 2).
accounts" on page 58 for