Lcd Panel During Boot Sequence - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Diagnostics
Boot from LAN?
Figure 8: LCD panel during boot sequence
4. After successful POST completion, the LCD panel displays a Welcome!!
5. After rebooting the HAFM appliance at the LCD panel, log on to the HAFM
40
c. After a few seconds, the LCD panel displays the following message
pertaining to boot sequence selection
Press <Enter>
d. Ignore the message. After ten seconds, the HAFM appliance performs the
boot sequence from the basic input/output system (BIOS). During the
boot sequence, the HAFM appliance performs additional POSTs and
displays the following operational information at the LCD panel:
— Host name.
— System date and time.
— LAN 1 and LAN 2 IP addresses.
— Fan rotational speed.
— Central processing unit (CPU) temperature.
— Hard disk capacity.
— Virtual and physical memory capacity.
message, then continuously cycles through and displays HAFM appliance
operational information.
appliance Windows 2000 desktop through a LAN connection to a
browser-capable PC. Refer to the HP StorageWorks Edge Switch 2/24
Installation Guide for instructions on accessing the HAFM appliance desktop.
The HAFM 8 Login dialog box displays
(Figure 8):
(Figure 9).
Edge Switch 2/24 Service Manual