HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 209

Table 29: HAFM application messages (Continued)
The maximum number
of products has already
been configured.
The maximum number
of products of this type
has already been
configured.
The maximum number
of remote network
addresses has already
been configured.
The maximum number
of HAFM application
sessions has been
reached.
The maximum number
of HAFM appliance
network addresses has
already been
configured.
The maximum number
of users has already
been configured.
The maximum number
of zones allowed has
already been
configured.
The maximum number
of zone sets has already
been configured.
Edge Switch 2/24 Service Manual
Message
The number of managed
HA Fabric Directors and
Edge Switches (48) that
can be defined to the
HAFM
reached.
The number of HA Fabric
Directors and Edge
Switches of this type (48)
that can be defined to the
HAFM
reached.
A maximum of four IP
addresses for remote
workstations can be
configured at the Session
Options dialog box. That
number was reached.
A maximum of eight
concurrent remote
management sessions
can be configured at the
Session Options dialog
box. The specified
number was reached.
The number of HAFM
appliance IP addresses
that can be defined to the
HAFM
reached.
The number of users (16)
that can be defined to the
HAFM
reached.
The maximum number of
zones that can be
defined was reached.
The maximum number of
zone sets that can be
defined was reached.
Description
application was
application was
application was
application was
Messages
Action
Delete an existing product
before adding a new
product.
Delete an existing product
of this type before adding
a new product.
Delete an existing IP
address before adding a
new IP address.
Increase the number of
remote sessions allowed (if
less than eight), or
terminate a session before
attempting to initiate a new
session.
Delete an existing IP
address before adding a
new address.
Delete an existing user
before adding a new user.
Delete an existing zone
before adding a new zone.
Delete an existing zone set
before adding a new zone
set.
225