HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 35

16
Inspect power supply operational states.
1. At the View panel, click the FRU Properties tab. The View panel (FRU
2. Inspect the Status fields for both power supplies.
Does the Status field display a Failed message for either power supply?
NO
17
Inspect the Status fields for switch FRUs.
Does the State field display a Failed message for any of the FRUs?
YES
A FRU failure is indicated. Continue to the next step to obtain event codes. If no
event codes are found, go to
MAP.
18
Obtain event codes from the EWS Event Log.
Note:
Record the date, time, and listed sequence, and determine if the codes are related to
the reported problem. Begin fault isolation with the most recent event code with the
highest severity level. Other codes may accompany this event code, or may indicate a
normal indication after a problem is recovered.
1. At the View panel, click Monitor at the left side of the panel. The Monitor
Edge Switch 2/24 Service Manual
Go to step 18
"MAP 0600: Port Failure and Link Incident
Exit MAP.
Properties tab) displays.
YES
A power supply failure is indicated. Go to
codes. If no event codes are found, go to
Distribution
NO
The switch appears operational. Exit MAP.
If multiple event codes are found, note all codes and associated severity levels.
panel opens with the Port List page displayed.
to obtain event codes. If no event codes are found, go to
Analysis" on page 54. Exit MAP.
"MAP 0500: FRU Failure
Diagnostics
Analysis" on page 100.
step 18 to obtain event
"MAP 0100: Power
Analysis" on page 89. Exit
37