HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 227

Table 30:
R_A_TOV must be
greater than E_D_TOV.
Resource is unavailable.
SANtegrity Feature not
installed. Please contact
your sales
representative.
Send firmware failed.
SNMP trap address not
defined.
Stop diagnostics failed.
The test is already
running.
Stop diagnostics failed.
The test was not running.
Edge Switch 2/24 Service Manual
Element Manager Messages (Continued)
Edge Switch 2/24
Message
R_A_TOV must be
greater than E_D_TOV.
The specified operation
cannot be performed
because the product is
unavailable.
The user selected Switch
Binding from the
Configure menu, but the
optional SANtegrity
Binding feature is not
installed.
Send firmware
operation has failed.
An SNMP trap address
must be defined if a
community name is
defined.
Diagnostics for the port
was not running and the
Stop was selected on the
Port Diagnostics dialog
box. Diagnostics quit for
the port for some
reason, but the Stop
button remains enabled.
The action to stop
diagnostics failed
because the test was not
running.
Description
Messages
Action
Change one of the values
so that R_A_TOV is greater
than E_D_TOV.
Verify that the HAFM
appliance-to-product link is
up. If the link is up, the
HAFM appliance may be
busy. Try the operation
again later.
Install the SANtegrity key
through the Configure
Feature Key dialog box
before using Switch
Binding features.
Retry the operation. If the
condition persists, contact
support personnel.
Define an SNMP address.
Verify port operation. Retry
diagnostics for port and
select Stop from the dialog
box. If problem persists,
contact your service
representative.
N/A. Informational
message.
243