HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 211

Table 29: HAFM application messages (Continued)
This switch is currently
part of this fabric and
cannot be removed from
the Fabric Membership
List. Isolate the switch
from the fabric prior to
removing it from the
Fabric Membership List.
This user name has
already been assigned.
This World Wide Name
was not accepted. The
World Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
Too many members
defined.
You do not have a
compatible version of
the HAFM appliance
software. In order for the
HAFM application to
function properly, a
compatible version must
be installed on the client
machine. Click OK to
install a compatible
version.
You do not have rights
to perform this action.
You must define an
SMTP server address.
Edge Switch 2/24 Service Manual
Message
A user attempted to
remove a Director or
Edge Switch from the
fabric membership list
using the Fabric Binding
option, but the Director
or Edge Switch is still part
of the fabric.
The specified user name
is already assigned and
configured.
A user attempted to add
a product to the fabric
membership list through
the Fabric Binding option
(SANtegrity Binding
feature), but an entry
already exists in the with
the same WWN.
The maximum number of
zone members that can
be defined was reached.
The
version running on the
HAFM appliance differs
from the version running
on the remote
workstation (client). A
compatible version must
be downloaded from the
HAFM appliance.
Configured user rights do
not allow this operation
to be performed.
A simple mail transfer
protocol (SMTP) server
address must be defined
and configured for e-mail
to be activated.
Description
HAFM
application
Messages
Action
Remove the director or
switch from the fabric by
setting the product offline
or blocking the E_Port
connection.
Modify (to make it unique)
or delete the duplicate
name.
Enter a unique WWN for
the Director or Edge Switch
at the Add Detached
Switch dialog box.
Delete an existing zone
member before adding a
new zone member.
Download a compatible
HAFM
version of the
application to the remote
workstation (client) using
the Web install procedure.
Verify user rights with the
customer's network
administrator and change
as required.
Define the SMTP server
address at the Configure
E-Mail dialog box.
227