HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 208

Messages
Table 29: HAFM application messages (Continued)
The Administrator user
cannot be deleted.
The Domain ID was not
accepted. The World
Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
The HAFM appliance is
busy processing a
request from another
Element Manager.
The link to the managed
product is not available.
The maximum number
of members has already
been configured.
The maximum number
of nicknames has
already been
configured.
The maximum number
of open products has
already been reached.
224
Message
The Administrator user is
permanent and cannot
be deleted from the
Configure Users dialog
box.
A user attempted to add
a Director or Edge Switch
to the fabric membership
list through the Fabric
Binding option
(SANtegrity Binding
feature), but a product
already exists in the
fabric with the same
domain ID.
The HAFM appliance is
processing a request
from another instance of
an
application, and cannot
perform the requested
operation.
The Ethernet connection
between the HAFM
appliance and managed
product is down or
unavailable.
The maximum number of
zone members that can
be defined to the
application was reached.
The maximum number of
nicknames that can be
defined to the
application was reached.
The maximum number of
open products allowed
was reached.
Description
Element Manager
HAFM
Action
Informational message
only-no action is required.
Enter a unique domain ID
for the switch in the Add
Detached Switch dialog
box.
Wait until the process
completes, then retry the
operation.
Establish and verify the
network connection.
Delete an existing zone
member before adding a
new zone member.
Delete an existing
nickname before adding a
new nickname.
Close an Element Manager
session (existing open
product) before opening a
new session.
Edge Switch 2/24 Service Manual