Reset Configuration Data - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Repair Information

Reset Configuration Data

Note:
disrupt server-to-switch communication. All optional features are disabled.
To reset the switch data to the factory default settings:
1. Notify the customer the switch is to be set offline. Ensure the customer's
2. Set the switch offline
3. Open the HAFM application. The View All - HAFM 8 main window displays.
4. Double-click the icon representing the switch for which the configuration file
5. Choose Maintenance > Reset Configuration. The Reset Configuration
6. Click Reset. When the reset process finishes, the dialog box closes and the
7. The switch IP address resets to the default address of 10.1.1.10.
8. To change the switch IP address and restart the HAFM appliance session, go
9. To restart an HAFM appliance session using the default IP address of
184
This procedure resets the switch IP address to the default of 10.1.1.10 and may
system administrator quiesces Fibre Channel frame traffic through the switch
and sets attached devices offline.
will be reset to factory default settings. The Hardware View for the selected
switch displays.
dialog box displays.
application returns to the Hardware View.
— If the configured IP address (prior to reset) was the same as the default
address, the switch-to-HAFM appliance Ethernet link is not affected and
the procedure is complete.
— If the configured IP address (prior to reset) was not the same as the default
address, the switch-to-HAFM appliance Ethernet link drops and HAFM
appliance communication is lost. Continue to the next step.
to step 10.
10.1.1.10:
a. Close the Edge Switch 2/24 Element Manager application and return to
HAFM application.
b. A gray square with a yellow exclamation mark displays adjacent to the
icon representing the reset switch, indicating the switch is not
communicating with the HAFM appliance.
("Set Offline State" on page 175).
Edge Switch 2/24 Service Manual