Switch IML
To IML the switch from the front panel:
1. Press and hold the IML/RESET button until the amber ERR LED blinks at
2. Release the button to IML the switch. During the IML, the switch-to-HAFM
Switch IPL
To IPL the switch from the HAFM appliance (Edge Switch 2/24 Element
Manager application):
3. Open the HAFM application. The View All - HAFM 8 main window displays.
4. Double-click the icon representing the switch requiring an IPL. The
5. Choose Maintenance > IPL. The Information dialog box displays.
6. Click Yes to IPL the switch. During the IPL, the switch-to-HAFM appliance
Edge Switch 2/24 Service Manual
twice the unit beaconing rate (approximately three seconds).
appliance Ethernet link drops momentarily and the following occur at the
Hardware View:
— As the network connection drops, the status table turns yellow, the Status
field displays No Link, and the State field displays Link Timeout.
— The status bar at the bottom of the window displays a grey square,
indicating that the switch status is unknown.
— Illustrated FRUs disappear, and appear again, as the connection is
re-established.
Hardware View for the selected switch displays.
Ethernet link drops momentarily and the following occur at the Hardware
View:
— As the network connection drops, the status table turns yellow, the Status
field displays No Link, and the State field displays Link Timeout.
— The status bar at the bottom of the window displays a grey square,
indicating switch status is unknown.
— Illustrated FRUs disappear, and appear again as the connection is
re-established.
Repair Information
169