Fabric Parameters; Bb_Credit; Configure Fabric Parameters Dialog Box - HP storageworks 2/32 Installation Manual

2. Choose Configure > Operating Parameters > Fabric Parameters from the
Figure 17: Configure Fabric Parameters dialog box
Note:
defaults. The only exception is the Preferred Domain ID. Change this value if the switch
will participate in a multiswitch fabric.
3. Use information under
4. After you change settings, click the Activate button.
5. Back up the configuration data when you are finished configuring the switch.
6. Set the switch online. For instructions, see

Fabric Parameters

Configure the following parameters as required by your fabric.

BB_Credit

Configure the switch to support buffer to buffer credit (BB_Credit) from 1 through
60. This is the value used for all ports, except those configured for extended
distance buffering (10-100 km). The default value is 16. For a description of the
buffer-to-buffer credit, refer to the industry specification, Fibre Channel Physical
and Signaling Interface.
Edge Switch 2/32 Installation Guide
Product Manager window. The Configure Fabric Parameters dialog box
displays (Figure 17).
Ordinarily, you do not need to change values in this dialog box from their
parameters in this dialog box.
page 52.
Installing and Configuring the Edge Switch 2/32
"Fabric Parameters" to change settings as required for
"Set the Switch Online" on
59