HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 75

11
Transmit or receive errors for a switch's Ethernet adapter exceeded a threshold,
the switch-to-HAFM appliance link was not connected, or the switch-to-HAFM
appliance link timed out. A problem with the Ethernet cable, Ethernet hub or
hubs, or other LAN-attached device is indicated.
Verify the switch is connected to the HAFM appliance through one or more
Ethernet hubs.
1. Ensure an RJ-45 Ethernet cable connects the switch to an Ethernet hub. If not,
2. Ensure an RJ-45 Ethernet cable connects the HAFM appliance to an Ethernet
3. Ensure the Ethernet cables are not damaged. If damaged, replace the cables.
Was a corrective action performed?
NO
12
Does the LAN configuration use multiple (up to four) Ethernet hubs that are
daisy-chained?
YES
13
Verify the hubs are correctly daisy-chained
Edge Switch 2/24 Service Manual
connect the cables as directed by the customer.
hub. If not, connect the cable as directed by the customer.
YES
Go to step 1.
NO
Go to step 14.
(Figure 19).
Diagnostics
77