Invalid Attachment Reasons And Actions - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

22
As indicated by a message or event code 081, a port has an invalid attachment.
The information in the Port Properties dialog box specifies the reason as listed in
Table
Table 13: Invalid Attachment Reasons and Actions
Unknown
ISL connection not allowed.
Incompatible switch.
External loopback plug connected.
N-Port connection not allowed.
Non-HP switch at other end.
Unauthorized port binding WWN.
Unresponsive node.
ESA security mismatch.
Fabric binding mismatch.
Authorization failure reject.
Unauthorized switch binding WWN.
Fabric mode mismatch.
CNT WAN extension mode mismatch.
23
The port connection conflicts with the configured port type and an ISL connection
is not allowed. Either an expansion port (E_Port) is incorrectly cabled to a Fibre
Channel device or a fabric port (F_Port) is incorrectly cabled to a fabric element.
1. At the HAFM appliance's Hardware View, click Configure > Ports. The
2. Use the vertical scroll bar as necessary to display the information row for the
3. Click the Type field and configure the port from the list box as follows:
Edge Switch 2/24 Service Manual
15.
Reason
Configure Ports dialog box displays.
port indicating an invalid attachment.
Click fabric port (F_Port) if the port is cabled to a device (node).
Action
Contact the next level of support.
Go to step 23.
Go to step 24.
Go to step 25.
Go to step 23.
Go to step 24.
Go to step 21.
Go to step 27.
Go to step 29.
Go to step 30.
Go to step 27.
Go to step 31.
Go to step 24.
Go to step 32.
Diagnostics
101