HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 198

Messages
Table 29: HAFM application messages (Continued)
Cannot display route.
Error 9.
Cannot display route.
No active zone enabled.
Cannot display route.
All switches in route
must be managed by the
same server.
Cannot display route.
All switches in route
must support routing.
Cannot have spaces in
field.
Cannot modify a zone
set with an invalid
name. Rename zone set
and try again.
Cannot modify a zone
with an invalid name.
Rename zone and try
again.
Cannot modify product.
214
Message
An internal error
occurred while trying to
show routes.
You cannot show the
route through a fabric
with no active zone.
You cannot show the
route through a fabric
that has switches or
directors that are
managed by a different
HAFM appliance.
You cannot show the
route through a fabric
that has switches or
directors which do not
support routing.
Spaces are not allowed
as part of the entry for
this field.
A zone set must have a
valid name to be
modified.
A zone must have a valid
name to be modified.
The selected product
cannot be modified.
Description
Edge Switch 2/24 Service Manual
Action
Retry the operation. If the
condition persists, contact
support personnel and
report the problem.
Enable the default zone or
activate a zone set before
attempting to show the
route.
This route cannot be shown
unless all Edge Switches
and Directors in the route
are managed by this
HAFM appliance.
The route must contain only
Directors or Edge Switches.
Delete spaces from the field
entry.
Assign a valid name to the
zone set, then click Modify.
Assign a valid name to the
zone, then click Modify.
Verify the HAFM
appliance-to-product link is
up.
If the link is up, the HAFM
appliance may be busy.
Another Element Manager
instance may be open.
The user may not have
permission to modify the
product.