HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 229

Table 30:
The firmware version
already exists.
The HAFM appliance is
busy processing a
request from another
Element Manager
The link to the switch is
not available.
The maximum number of
address configurations
has been reached.
The optical transceiver is
not installed.
The switch did not
respond in the time
allowed.
The IPL configuration
cannot be deleted.
This feature has not been
installed. Please contact
your sales
representative.
Edge Switch 2/24 Service Manual
Element Manager Messages (Continued)
Edge Switch 2/24
Message
Firmware version
already exists in the
database.
The HAFM appliance
could not process the
current request because
it is busy handling a
request from another
Element Manager.
The link from the HAFM
appliance to the switch is
not available.
The maximum number of
saved address
configurations has been
reached.
No information
available for a port that
is not installed.
A time out was reached
waiting for the switch to
respond to the action.
Deletion of the IPL
address configuration
was attempted and was
not allowed.
Indicator that the feature
has not been installed on
this switch.
Description
Messages
Action
N/A. An informational
message.
Retry the operation later. If
the condition persists,
contact support personnel.
Check Ethernet connection.
Delete configurations no
longer needed to allow
new configuration to be
saved.
Ensure the optical
transceiver is installed and
fully seated.
Try action again.
Cancel the operation.
Contact your sales
representative to obtain the
desired feature.
245