Event Codes
This appendix lists all three-digit HP StorageWorks Edge Switch 2/24 event codes
and provides detailed information about each code. Event codes are listed in
numerical order and in tabular format.
An event is an occurrence (state change, problem detection, or problem
correction) that requires user attention or that should be reported to a system
administrator or service representative. An event usually indicates a switch
operational state transition, but may also indicate an impending state change
(threshold violation). An event may also provide information only, and not
indicate an operational state change. Event codes are grouped as follows:
Edge Switch 2/24 Service Manual
System Events (000 through
Power Supply Events (200 through
Fan Module Events (300 through
CTP Card Events (400 through
Port Events (500 through
Thermal Events (800 through
199), page 251
299), page 270
399), page 275
499), page 281
599), page 293
899), page 305
B
249