Removing The Expansion Bracket - IBM BladeCenter JS21 Types 8844 Service Manual

Removing the expansion bracket

To remove the expansion bracket, complete the following steps.
Expansion bracket
1. Read the safety information that begins on page vii and "Installation guidelines"
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
3. Remove the blade server cover (see "Removing the blade server cover" on
4. If a standard-form-factor expansion card is installed, remove it (see "Removing
5. Remove the two screws that secure the expansion bracket to the system board
6. If you are instructed to return the expansion bracket, follow all packaging
on page 141.
the blade server from a BladeCenter unit" on page 143).
page 145).
a standard-form-factor expansion card" on page 155).
and remove the expansion bracket.
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 4. Removing and replacing blade server components
161