IBM BladeCenter JS21 Types 8844 Service Manual page 72

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
BA130003
BA130004
BA130010
BA130011
BA130012
BA130013
BA130014
56
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
SCSI CD-ROM send diagnostic failed;
sense data available.
SCSI CD-ROM send diagnostic failed:
devofl command.
USB CD-ROM in the media tray: device
remained busy longer than the time-out
period
USB CD-ROM in the media tray:
execution of ATA/ATAPI command was
not completed with the allowed time.
USB CD-ROM in the media tray:
execution of ATA/ATAPI command failed.
USB CD-ROM in the media tray:
bootable media is missing from the drive
USB CD-ROM in the media tray: the
media in the USB CD-ROM drive has
been changed.
Action
1. Verify that the SCSI cables and devices are
properly plugged; correct any problems that
are found.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Verify that the SCSI cables and devices are
properly plugged; correct any problems that
are found.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Retry the operation.
2. Go to "Checkout procedure" on page 106.
3. Replace the system-board and chassis
assembly.
1. Retry the operation.
2. Go to "Checkout procedure" on page 106.
3. Replace the system-board and chassis
assembly.
1. Remove the CD or DVD in the drive and
replace it with a known-good disk.
2. Go to "Checkout procedure" on page 106.
3. Replace the USB CD or DVD drive.
4. Replace the system-board and chassis
assembly.
1. Insert a bootable CD in the drive and retry
the operation.
2. Go to "Checkout procedure" on page 106.
3. Replace the USB CD or DVD drive.
4. Replace the system-board and chassis
assembly.
1. Retry the operation.
2. Go to "Checkout procedure" on page 106.
3. Replace the USB CD or DVD drive.
4. Replace the system-board and chassis
assembly.