IBM BladeCenter JS21 Types 8844 Service Manual page 76

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
BA180014
BA180020
BA180099
BA180100
BA188000
BA188001
BA188002
BA180008
BA180009
BA180010
BA180011
60
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
MSI software error.
No response was received from a slot
during PCI probing.
PCI probe error; bridge in freeze state,
slot in reset state
The FDDI adapter Fcode driver is not
supported on this server. IBM may
produce a compatible driver in the future,
but does not guarantee one.
There is an unsupported adapter in the
PCI slot
EEH recoved a failing I/O adapter
EEH was not able to recover the failing
I/O apdater.
PCI device Fcode evaluation error
The Fcode on a PCI adapter left a data
stack imbalance
PCI probe error, bridge in freeze state
PCI bridge probe error, bridge is not
usable
Action
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for adapter firmware updates; apply
if available.
2. Check for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
Remove the adapter.
Replace the adapter.
Replace the adapter.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Check for adapter firmware updates; then,
install the updates if available.
2. Check for server firmware updates; then,
install the updates if available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.