IBM BladeCenter JS21 Types 8844 Service Manual page 48

v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is resolved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Progress code
CA00E875
CA00E876
CA00E877
CA00E879
CA00E885
CA00E886
CA00E887
CA00E890
CA00E891
CA00EAA1
CA060203
32
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
Initializing rtas_last_error
Initializing rtas_error_inject
Initializing dump interface
Initialize platform-assisted KDUMP
interface
Initializing set-power-level
Initializing exit2c
Initialize gdata for activate_firmware
Starting to initialize open firmware
Finished initializing open firmware
Probe PCI-PCI bridge bus
An alias was modified or created
Action
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Reboot the blade server.
2. Check for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.