Location codes
Location codes are displayed with some error codes to identify the component that
caused the error.
Note: Location codes do not indicate the location of the blade server within the
BladeCenter unit, they only identify components of the blade server.
Error logs
Any errors that are detected by the POST are sent to the BladeCenter management
module event log (see the BladeCenter Management Module User's Guide for
information about the event log). Depending on your operating system and the
utilities you have installed, error messages might also be stored in an operating
system log (see the documentation that comes with the operating system for more
information).
66
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Location code
Um-E1
Um-P1-C1
Um-P1-C2
Um-P1-C3
Um-P1-C4
Um-P1-C5
Um-P1
Um-P1-T1
Um-P1-T2
Um-P1-T3
Um-P1-T4
Um-P1-T5
Um-P1-T6
Um-P1-T7
Um-P1-T8
Um-P1-T9
Um-P1-T10
Um-P1-T11
Um-P1-T12
Um-P1-T10-L0-L0
Um-P1-T11-L0-L0
Un-Y1
Um = Uffff.001.sssssss (where: ffff =
Enclosure feature code, sssssss = serial
number)
Un = Utttt.mmm.sssssss (where: tttt =
machine type, mmm = model number,
sssssss = serial number)
Component
Battery
DIMM 1
DIMM 2
DIMM 3
DIMM 4
I/O expansion adapter
System-board and chassis assembly
SAS hard disk drive 1
SAS hard disk drive 2
Firmware version
Um is for enclosure locations
Un is for system VPD and Firmware