IBM BladeCenter JS21 Types 8844 Service Manual page 74

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
BA150070
BA151001
BA151002
BA153002
BA153003
BA154010
BA154020
BA154030
BA154040
BA154050
58
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
The receive operation failed.
10/100 Mbps Ethernet PCI adapter:
internal wrap test failure
10/100 Mbps Ethernet card failure
Gigabit Ethernet adapter failure
Gigabit Ethernet adapter failure
HEA software error
The required open firmware property
was not found.
Invalid parameters were passed to the
HEA device driver.
The TFTP package open failed
The transmit operation failed.
Action
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
Replace the adapter specified by the location
code.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
Make sure that the MAC address programmed
in the FLASH/EEPROM is correct.
1. Check for server firmware updates; then,
install the updates if available.
2. Replace the Gigabit Ethernet adapter.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Check for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.