IBM BladeCenter JS21 Types 8844 Service Manual page 27

v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is resolved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Progress code
C2001300
C20013FF
C2001400
C2001410
C20014FF
C2002100
C2002110
C200211F
C20021FF
C2002200
Description
Initializing ISL roadmap
ISL roadmap initialized successfully
Initializing SP Communication Area #1
Initializing startup parameters
Startup parameters initialized
successfully
Power on racks
Issuing a power on command
Power on command successful
Power on phase complete
Begin acquiring slot locks
Action
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
1. Go to "Recovering the system firmware" on
page 127.
2. Replace the system-board and chassis
assembly.
Chapter 2. Diagnostics
11