IBM BladeCenter JS21 Types 8844 Service Manual page 52

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Attention code
AA130014
AA170210
AA170211
AA190001
AA260001
BA00E820
BA00E830
36
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
The media in a USB CD-ROM has been
changed.
Setenv/$setenv parameter error - the
name contains a null character.
Setenv/$setenv parameter error - the
value contains a null character.
The hypervisor function to get/set the
time-of-day clock reported an error.
The system is waiting for the machine
type, model, and serial number to be
entered.
lpevent communication failure
ibm,event-scan init failure
Action
1. Retry the operation.
2. Check for server firmware updates; then,
install the updates if available and retry the
operation.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Use the operating system to set the system
clock.
2. Check for server firmware updates; then,
install the updates if available.
Enter the machine type, model, and serial
number of the blade server at the prompt.
1. Reboot the blade server.
2. Look for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
1. Reboot the blade server.
2. Look for server firmware updates; apply if
available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.