Installing A Sas Hard Disk Drive - IBM BladeCenter JS21 Types 8844 Service Manual

Installing a SAS hard disk drive

To install a SAS hard disk drive, complete the following steps.
Release levers
1. Identify the location in which the hard disk drive will be installed.
2. Place the drive into the hard disk drive tray and push it toward the rear of the
3. Install the blade server cover (see "Installing the blade server cover" on page
4. Install the blade server into the BladeCenter unit (see "Installing the blade
150
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
SAS hard
disk drives
Attention: Do not press on the top of the drive. Pressing the top could
damage the drive.
drive, into the connector until the drive moves past the lever at the front of the
tray.
146).
server in a BladeCenter unit" on page 144).