IBM BladeCenter JS21 Types 8844 Service Manual page 174

Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the battery, complete the following steps.
1. Follow any special handling and installation instructions that come with the
2. Tilt the battery so that you can insert it into the socket, under the battery clip.
3. As you slide it under the battery clip, press the battery down into the socket.
4. Install the blade server cover (see "Installing the blade server cover" on page
5. Install the blade server into the BladeCenter unit (see "Installing the blade
6. Turn on the blade server and reset the system date and time through the
7. Make sure that the boot list is correct using the management module Web
158
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
battery.
Make sure that the side with the positive (+) symbol is facing up.
146).
server in a BladeCenter unit" on page 144).
operating system that you installed. For additional information, see your
operating-system documentation.
interface (see the management module documentation for more information) or
the SMS Utility (see "Using the SMS utility" on page 166 for more information).