IBM BladeCenter JS21 Types 8844 Service Manual page 69

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
BA060072
BA060075
BA060200
BA060201
BA060202
BA07xxxx
BA090001
BA090002
BA090003
Description
client-arch-support software error
client-arch-support firmware error
Failed to set the operating system's boot
list from the management module boot
list.
Failed to read the "boot path" value in
the VPD
Failed to read the "boot path" value in
the VPD with the new value.
SCSI controller failure
SCSI DASD: test unit ready failed;
hardware error
SCSI DASD: test unit ready failed; sense
data available
SCSI DASD: send diagnostic failed;
sense data available
Action
1. Look for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Look for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Verify that the boot list is set up in the MM.
2. Check for server firmware and MM firmware
updates; apply if available.
3. Go to "Checkout procedure" on page 106.
4. Replace the system board and chassis
assembly.
1. Look for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Look for server firmware updates; apply if
available.
2. Go to "Checkout procedure" on page 106.
3. Replace the system board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
Chapter 2. Diagnostics
53