IBM BladeCenter JS21 Types 8844 Service Manual page 46

v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is resolved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Progress code
CA00E1F8
CA00E1F9
CA00E1FA
CA00E1FB
CA00E1FC
CA00E1FE
CA00E1FF
CA00E440
CA00E441
CA00E442
CA00E443
30
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
Building boot device list for SCSI
adapters. (The location code of the SCSI
adapter being scanned is also
displayed.)
Building boot device list for fibre-channel
adapters. (The location code of the SAN
adapter being scanned is also
displayed.)
Building device list for SCSI adapters
(The device ID and device LUN of the
device being scanned is also displayed.)
Scan SCSI bus for attached devices
Building boot device list for SSA
adapters. (The location code of the SSA
adapter being scanned is also
displayed.)
Building device list for fibre-channel
(SAN) adapters. (The WWPN of the SAN
adapter being scanned is also
displayed.)
Building device list for fibre-channel
(SAN) adapters. (The LUN of the SAN
adapter being scanned is also
displayed.)
Validate NVRAM, initialize partitions as
needed
Generate /options node NVRAM
configuration variable properties
Validate NVRAM partitions
Generate NVRAM configuration variable
dictionary words
Action
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Check for server firmware updates; then,
install the updates if available and retry the
operation.
2. Go to "Checkout procedure" on page 106.
3. Replace the system-board and chassis
assembly.