IBM BladeCenter JS21 Types 8844 Service Manual page 42

v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is resolved.
v See Chapter 3, "Parts listing, Types 7988 and 8844," on page 137 to determine which components are
CRUs and which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Progress code
CA00E177
CA00E178
CA00E179
CA00E17B
CA00E198
26
BladeCenter JS21 Types 7988 and 8844: Problem Determination and Service Guide
Description
Transfer failure due to TFTP error
condition
Initiating TFTP file transfer
Closing BOOTP
Microprocessor clock speed
measurement
The system is rebooting to enact
changes specified in
ibm,client-architecture-support
Action
1. Make sure that:
v The bootp server is correctly configured;
then, retry the operation.
v The network connections are correct;
then, retry the operation.
2. Go to "Checkout procedure" on page 106.
3. If no problems are found with bootp server
or network, replace the system-board and
chassis assembly.
1. Make sure that:
v The bootp server is correctly configured,
then retry the operation.
v The network connections are correct,
then retry the operation.
2. Go to "Checkout procedure" on page 106.
3. If no problems are found with the bootp
server or network, replace the system board
and chassis assembly.
1. Make sure that:
v The bootp server is correctly configured,
then retry the operation.
v The network connections are correct,
then retry the operation.
2. Go to "Checkout procedure" on page 106.
3. If no problems are found with the bootp
server or network, replace the system board
and chassis assembly.
1. Go to "Checkout procedure" on page 106.
2. Replace the system-board and chassis
assembly.
1. Make sure that:
v The bootp server is correctly configured,
then retry the operation.
v The network connections are correct,
then retry the operation.
2. Go to "Checkout procedure" on page 106.
3. If no problems are found with the bootp
server or network, replace the system board
and chassis assembly.