Table 141: Show L2Vpn Interface Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Meaning
676
MPLS shim interface UID is 0x2d000007
Lower interface UID is 0x0b000005
Condensed location is 0x00020000
Received:
3 packets
204 bytes
19 errors
0 discards
Sent:
0 packets
0 bytes
0 errors
0 discards
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.100
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Table 141 on page 676 lists the show l2vpn interface command output fields.

Table 141: show l2vpn interface Output Fields

Field Name
MPLS shim interface
ATM circuit type
Member of L2VPN instance
Local site ID
Remote site ID
Control word
send sequence numbers
Relay format
Administrative state
Operational state
Operational MTU
MPLS shim interface UID
Lower interface UID
Field Description
Type and specifier for MPLS shim interface
Type of ATM circuit
Name of the VPWS instance to which the interface belongs
Local customer site ID configured on the interface
Remote customer site ID configured on the interface
Local preference for the control word, preferred or not preferred
Local preference for sequence numbers, send or don't send
Type of signaling and encapsulation used by the router for layer 2
traffic
Administrative state of the interface, enabled or disabled
Operational state of the interface, up or down
Maximum allowable size in bytes of the maximum transmission
unit for the interface
UID automatically assigned to the MPLS shim interface when it is
created
UID automatically assigned to the MPLS major interface when it is
created
Copyright © 2010, Juniper Networks, Inc.