Monitoring Layer2 Nlri For Vpls Instances; Table 126: Show Subscriber-Policy Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring Layer2 NLRI for VPLS Instances

Purpose
Action
host1#show ip bgp l2vpn all
Local BGP identifier 1.1.1.1, local AS 100
4 routes (264 bytes)
4 destinations (288 bytes) of which 4 have a route
0 routes selected for route tables installation
0 unicast/multicast routes selected for route table installation
0 unicast/multicast tunnel-usable routes selected for route table installation
0 tunnel-only routes selected for tunnel-route table installation
4 path attribute entries (608 bytes)
Local-RIB version 11. FIB version 11.
Status codes: > best, * invalid, s suppressed, d dampened, r rejected,
a auto-summarized
Prefix
> 1:1
> 1:1
626

Table 126: show subscriber-policy Output Fields

Field Name
Subscriber
Permit
Deny
show subscriber-policy
Display layer 2 NLRI for all VPLS instances in the L2VPN address family, for a particular
VPLS instance in the L2VPN address family, or for a particular VPLS instance in the VPLS
address family.
The l2vpn vpls keywords display layer 2 NLRI for a particular VPLS instance in the VPLS
address family.
The l2vpn all keywords display layer 2 NLRI for all VPLS instances in the L2VPN address
family. The output for this version of the command also includes information about any
VPWS instances configured in the L2VPN address family.
To display layer 2 NLRI for the route that matches a specified prefix (site ID and block
offset) in the L2VPN address family or in the VPLS address family, use the site-id and
block-offset keywords.
To display information for all VPLS instances (and all VPWS instances) in the L2VPN
address family:
Peer Next-hop
0.0.0.0 self
0.0.0.0 self
Field Description
Name of the subscriber policy
Indicates that the subscriber interface forwards packets of the
specified type. For the relearn attribute, specifies that relearning a
MAC address entry on a different interface from the one initially
associated with this entry in the forwarding table is allowed on this
interface
Indicates that the subscriber interface filters packets of the specified
type. For the relearn attribute, specifies that relearning is prohibited
on this interface
MED LocPrf Weight Origin
0 IGP
0 IGP
Copyright © 2010, Juniper Networks, Inc.