Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 10

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

JunosE 11.2.x BGP and MPLS Configuration Guide
x
Setting the BGP Identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Configuring Neighbors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Configuring BGP Peer Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting the Peer Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Assigning a Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Logging Neighbor State Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Specifying a Source Address for a BGP Session . . . . . . . . . . . . . . . . . . . . . . . 30
Specifying Peers That Are Not Directly Connected . . . . . . . . . . . . . . . . . . . . . 32
Specifying a Single-Hop Connection for IBGP Peers . . . . . . . . . . . . . . . . . . . . 34
Controlling the Number of Prefixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Removing Private AS Numbers from Updates . . . . . . . . . . . . . . . . . . . . . . . . . 35
Checking AS Path Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Enabling MD5 Authentication on a TCP Connection . . . . . . . . . . . . . . . . . . . . 37
Setting the Maximum Size of Update Messages . . . . . . . . . . . . . . . . . . . . . . . 38
Setting Automatic Fallover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Automatic Summarization of Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Administrative Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Configuring BGP for Overload Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Enabling Route Storage in Adj-RIBs-Out Tables . . . . . . . . . . . . . . . . . . . . . . . 41
Effects of Changing Outbound Policies . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Configuring the Address Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Enabling Lenient Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Configuring Promiscuous Peers and Dynamic Peering . . . . . . . . . . . . . . . . . . 47
Configuring Passive Peers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Advertising Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Prefixes Originating in an AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Advertising Best Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Redistributing Routes into BGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Redistributing Routes from BGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Configuring a Default Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Advertising Default Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Redistributing Default Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting a Static Default Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting the Minimum Interval Between Routing Updates . . . . . . . . . . . . . . . . 58
Aggregating Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Advertising Inactive Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Verifying an AS Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Advertising IPv4 Routes Between IPv6 BGP Peers . . . . . . . . . . . . . . . . . . . . . 63
Advertising Routes Conditionally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Configuring BGP Routing Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Types of BGP Route Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Applying Table Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Access Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Filtering Prefixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Filtering AS Paths with a Filter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents