Monitoring All Routes In A Bgp Community List - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring All Routes in a BGP Community List

Purpose
Action
204
Table 47: show bgp ipv6 summary Output Fields (continued)
Field Name
FIB version
Neighbor
AS
Ver
State
Up/down time
Messages sent
Messages received
Prefixes received
Rib Ver
Send Q
More InQ
show bgp ipv6 summary
show ip bgp summary
Display routes that are permitted by a BGP community list.
To display routes that are permitted by a BGP community list:
host1#show ip community-list
Community List 1:
permit 752877569 (11488:1)
permit 752877570 (11488:2)
permit 752877571 (11488:3)
permit 752877572 (11488:4)
Community List 2:
permit 4294967043 (local-as)
Field Description
Number that is increased by one each time BGP updates the routes
in the IP routing table based on changes in the local RIB. The FIB
version matches the local-RIB version when BGP has finished
updating the routes in the IP route table. The FIB version is less than
the local-RIB version when BGP is still in the process of updating
the IP routing table.
BGP neighbors
AS number of the peer
Negotiated BGP version number
State of the connection
Time the connection has been up or down
Number of messages sent to peer
Number of messages received from peer
Number of prefixes received from peer
Last RIB version queued to be sent to peer
Number of messages queued to be sent to peer
Status indicating whether any messages are waiting to be sent to
peer
Copyright © 2010, Juniper Networks, Inc.