Table of Contents
Advertisement
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
To display information about routes that have inconsistent AS-paths:
host1#show ip bgp inconsistent-as
Local BGP identifier 192.168.1.10, local AS 123
0 routes (0 bytes used), 0 distinct destinations (0 bytes used)
0 routes selected for route table installation
0 path attribute entries (0 bytes used)
Status codes: > best, * invalid, s suppressed, d dampened, r rejected
Prefix
Next-hop
> 4.0.0.0/8
0.0.0.0
4.0.0.0/8
192.168.1.1
Table 34 on page 179 lists the show ip bgp inconsistent-as command output fields.
Table 34: show ip bgp inconsistent-as Output Fields
Field Name
Local BGP identifier
local AS
routes
distinct destinations
routes selected for route
table installation
path attribute entries
Prefix
Next hop
MED
LocPrf
Weight
Origin
AS-path
MED LocPrf Weight AS-path
1
0 11488
Field Description
BGP router ID of the local router
Local autonomous system number
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count.
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count.
Number of routes in the BGP routing table that have been inserted
into the IP routing table
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
Prefix for the routing table entry
IP address of the next hop
Multiexit discriminator for the route
Local preference for the route
Assigned path weight
Origin of the route
AS-path through which this route bas been advertised
Chapter 2: Monitoring BGP
32768 empty
701 1
179
Advertisement
Table of Contents
Troubleshooting
