Monitoring Advertised Bgp Routes - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Related Topics

Monitoring Advertised BGP Routes

Purpose
Copyright © 2010, Juniper Networks, Inc.
Table 25: show ip bgp Output Fields (continued)
Field Name
Communities
Stale
unicast/multicast routes
selected for route table
installation
unicast/multicast
tunnel-usable routes
selected for route table
installation
tunnel-only routes selected
for tunnel-route table
installation
path attribute entries
Statistics baseline set
Route-map
Backdoor
CalPrf
show bgp ipv6
show ip bgp
Display the routes in the specified neighbor's or peer group's Adj-RIBs-Out table for IPv4
or IPv6.
For peers, display the attributes associated with the route before the application of any
outbound policy. For peer groups, display the attributes associated with the route after
the application of any outbound policy; that is, the actual advertised attributes. Report
whether the indirect next hop of a route is unreachable; if not, display the IGP cost to the
indirect next hop.
Field Description
Community number associated with the route
Routes that have gone stale due to peer restart
Number of unicast routes in the BGP routing table that have been
inserted into the IP routing table that are also available for use in
the multicast view of the IP routing table
Number of unicast and multicast routes in the BGP routing table
that have been inserted into the IP routing table that are also
available for use in the IP tunnel routing table
Number of routes in the BGP routing table that have been inserted
into the IP tunnel routing table
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
Timestamp indicating when the statistics baseline was last set
Indicates whether network-route filtering is enabled
Indicates whether an IGP backdoor route is favored over an EBGP
route
Calculated preference
Chapter 2: Monitoring BGP
167