Table 140: Show L2Vpn Instance Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Meaning
674
Interface Local-Site-Id
--------------- -------------
FastEthernet4/1 1
L2VPN: l2vpn2
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:12
Site Range 20
Sites:
Site Name westford Site Id 1
Site Name boston Site Id 3
Route Targets:
Route Target: RT:100:2 both
Interface Local-Site-Id
---------- -------------
ATM2/0.122 1
ATM2/0.123 1
ATM2/0.124 3
ATM2/0.121 3
To display detailed information about a particular VPWS instance:
host1#show l2vpn instance l2vpn1 detail
L2VPN: l2vpn1
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multi-homed:
Site-Priority:
Route Targets:
Route Target: RT:100:2 both
Interface Local-Site-Id
---------- -------------
ATM2/0.100 1
ATM2/0.12 1
ATM1/1.1 1
Table 140 on page 674 lists the show l2vpn instance command output fields.

Table 140: show l2vpn instance Output Fields

Field Name
L2VPN
Encapsulation Type
Use of control word
sequence numbers
Remote-Site-Id
--------------
2
Admin
Remote-Site-Id state
-------------- -------
2 enabled
3 enabled
1 enabled
2 enabled
Yes
45
Admin
Remote-Site-Id state
-------------- -------
2 enabled
3 enabled
2 enabled
Field Description
Name of VPWS instance
Encapsulation type configured for the VPWS instance
Local preference for control word, preferred or not preferred
Local preference for sequence number, send or don't send
Admin Oper
state state
------- -----
enabled up
Oper
state
-----
up
up
up
up
Oper
state
-----
up
up
down
Copyright © 2010, Juniper Networks, Inc.