Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 653

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
host1#show bridge interface atm 3/1.10
atm3/1.10
BridgeGroup: vplsB
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Trunk
Statistics:
In Octets:
1958
In Frames:
14
In Discards:
1
In Errors:
0
Out Octets:
1930
Out Frames:
14
Out Discards: 1
Out Errors:
0
Time since counters last reset: 00:14:32
queue 0: traffic class best-effort, bound to bridge ATM3/1.10
Queue length 0 bytes
Forwarded packets 14, bytes 2238
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
To display information about all interfaces in a VPLS instance, including the VPLS virtual
core interface (vplsB):
host1#show bridge vplsB interface
FastEthernet1/1.1
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: samplepolicy
Statistics:
In Octets:
3770
In Frames:
27
In Discards:
0
In Errors:
0
Out Octets:
3682
Out Frames:
27
Out Discards: 0
Out Errors:
0
Time since counters last reset: 01:07:08
queue 0: traffic class best-effort, bound to bridge FastEthernet1/1.1
Queue length 0 bytes
Forwarded packets 27, bytes 3898
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
vpls vplsB
Port Number: 2
Operational Status: Down
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Trunk
Chapter 13: Monitoring VPLS
617

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents