Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 238

JunosE 11.2.x BGP and MPLS Configuration Guide
202
Table 47: show bgp ipv6 summary Output Fields (continued)
Field Name
Auto-summary
Always compare MED
Compare MED within
confederation
Advertise inactive routes
Advertise best external
route to internal peer
Enforce first AS
Missing MED as worst
Route flap dampening
Maximum number of
equal-cost EBGP paths
Maximum number of
equal-cost IBGP paths
Log neighbor changes
Fast External Fallover
No maximum received
AS-path length
BGP administrative
distances
Router is a route reflector
Client-to-client reflection
Cluster ID
Route-target filter
Default IPv4-unicast
Redistribution of iBGP
routes
Field Description
Status of auto summarization of routes redistributed into BGP
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Number of paths
Number of paths
Status, enabled or disabled
Status, enabled or disabled
Indicates whether limit is set for AS path length and, if set, the limit
Distances for external, internal, and local BGP routes
Indicates whether the router has been configured as a route reflector
Whether client-to-client reflection is configured (enabled) or not
(disabled)
Identifying number for cluster ID
Status, enabled or disabled
Status, enabled or disabled
Status, enabled or disabled
Copyright © 2010, Juniper Networks, Inc.