Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 386

JunosE 11.2.x BGP and MPLS Configuration Guide
350
58 hello recv, 57 hello sent, 0 bad hello recv
adj setup time = 00:04:44
last hello recv time = 00:00:05, last hello sent time = 00:00:05
MPLS Statistics:
Rcvd: 0 failed lbl lookup, 0 octets, 0 hcOctets
0 pkts, 0 hcPkts, 0 errors, 0 discards
Sent: 0 octets, 0 hcOctets, 0 pkts
0 hcPkts, 0 errors, 0 discards
1 adjacency, 1 session, 3 accum adjacency, 3 accum session
14058 hello recv, 14063 hello sent, 0 hello rej
3 adj setup, 2 adj deleted
The following excerpt shows LDP and RSVP-TE information for MPLS interface atm 6/1.1:
host1:vr2#show mpls interface atm 6/1.1
...
MPLS major interface ATM6/1.1
ATM circuit type is 1483 LLC encapsulation
Administrative state is enabled
Operational state is up
Operational MTU is 9180
Received:
0 packets
0 bytes
0 errors
0 discards
0 failed label lookups
Sent:
0 packets
0 bytes
0 errors
0 discards
LDP information:
10.1.1.1/24
enabled with profile 'default'
0 hello recv, 2 hello sent, 0 hello rej
0 adj setup, 0 adj deleted,
RSVP
Enabled with profile default
Authentication is disabled
Authentication key: <none>
Hellos are on with an interval of 10000 and miss limit of 4
Hello settings are not inherited
To display detailed information about MPLS interfaces:
host1:pe1#show mpls interface detail
MPLS major interface ATM2/0.10
ATM circuit type is 1483 LLC encapsulation
Administrative state is enabled
Operational state is up
Operational MTU is 9180
MPLS major interface UID is 0x19000001
Lower interface UID is 0x0b000031
Uses platform label space
Peer IPv4 interface is ATM2/0.10 (UID 0x000000be)
No peer IPv6 interface
Upper IPv4 interface is ip19000001.mpls.ip (UID 0x000000bf, FEC index 0x0000003f)
No upper IPv4 VPN interface
No upper IPv6 interface
No upper IPv6 VPN interface
Condensed location is 0x00020000
Copyright © 2010, Juniper Networks, Inc.