Table 29: Show Ip Bgp Community Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Meaning
Related Topics
172
Table 29 on page 172 lists the show ip bgp community command output fields.

Table 29: show ip bgp community Output Fields

Field Name
Local router ID
local AS
routes
paths
distinct prefixes
routes selected for route
table installation
path attribute entries
Prefix
Peer
Next hop IP address
MED
CalPrf
Weight
Origin
show bgp ipv6 community
show ip bgp community
Field Description
BGP router ID of the local router
Local autonomous system number
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count.
Total number of routes stored in the BGP routing table. If several
peers have advertised a route to the same prefix, all routes are
included in this count.
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count.
Number of routes in the BGP routing table that have been inserted
into the IP routing table
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
Prefix for the routing table entry
IP address of BGP peer
IP address of the next hop
Multiexit discriminator for the route
Calculated preference for the route
Assigned path weight
Origin of the route
Copyright © 2010, Juniper Networks, Inc.