Tracing The Path Of An Mpls Echo Request Packet To An L3Vpn Ip Or Ipv6 Prefix; Sending An Mpls Echo Request Packet To An Rsvp-Te Tunnel; Tracing The Path Of An Mpls Echo Request Packet To An Rsvp-Te Tunnel; Sending An Mpls Echo Request Packet To A Vpls Instance - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

JunosE 11.2.x BGP and MPLS Configuration Guide

Tracing the Path of an MPLS Echo Request Packet to an L3VPN IP or IPv6 Prefix

Sending an MPLS Echo Request Packet to an RSVP-TE Tunnel

Tracing the Path of an MPLS Echo Request Packet to an RSVP-TE Tunnel

Sending an MPLS Echo Request Packet to a VPLS Instance

Tracing the Path of an MPLS Echo Request Packet to a VPLS Instance

Packet Flow Examples for Verifying MPLS Connectivity

372
Issue the ping mpls l3vpn command.:
host1:pe1#ping mpls l3vpn vrf pe11 10.32.45.21/32
To send MPLS echo request packets to discover and examine the path MPLS packets
follow to the L3VPN IP or IPv6 prefix:
Issue the trace mpls l3vpn command.
host1:pe1#trace mpls l3vpn vrf pe11 10.2.3.21/32
To send an MPLS echo request packet to the specified RSVP-TE tunnel:
Issue the ping mpls rsvp command.
host1:pe1#ping mpls rsvp tunnel west1
To send MPLS echo request packets to discover and examine the path MPLS packets
follow to the specified RSVP-TE tunnel:
Issue the trace mpls rsvp tunnel command.
host1:pe1:pe11#trace mpls rsvp tunnel west1 detail
To send an MPLS echo request packet to the specified VPLS instance:
Issue the ping mpls vpls command.
host1:pe1#ping mpls vpls vrf pe11 vplsA remote-site-id 2
To send MPLS echo request packets to discover and examine the path MPLS packets
follow to the specified VPLS instance:
Issue the trace mpls vpls command.
host1:pe1#trace mpls vpls vrf pe11 vplsA remote-site-id 2 detail
Figure 67 on page 373 shows a sample IPv4/IPv6 L3VPN topology with LDP or RSVP-TE
base tunnels. Two base tunnels (one in each direction) are present between 10.1.1.1 and
10.2.2.2. The packet flow examples that follow refer to this sample topology.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents