Table 109: Show L2Vpn Interface Output Fields; Monitoring L2Vpn Interfaces For Vpws - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Related Topics

Monitoring L2VPN Interfaces for VPWS

Display configuration and status information for interfaces on the router that are
Purpose
that are configured to be members of VPWS L2VPNs in the current VR. You can
display information for a specific L2VPN interface, for all L2VPN interfaces in the
specified VPWS instance, or for all L2VPN interfaces in all VPWS instances. The detail
keyword displays detailed information about the specified L2VPN interface or all
L2VPN interfaces.
To display L2VPN interface information for a particular VPWS instance:
Action
host1#show l2vpn interface instance l2vpn1
MPLS shim interface ATM2/0.100
Table 109 on page 684 lists the show l2vpn interface command output fields.
Meaning

Table 109: show l2vpn interface Output Fields

684
Monitoring L2VPN Interfaces for VPWS
show l2vpn instance
ATM circuit type is AAL5
Member of L2VPN instance l2vpn1
Local site ID is 1
Remote site ID is 2
Control word is preferred by default
Do send sequence numbers by default
Relay format is atm-aal5-sdu-vcc by default
Administrative state is enabled
Operational state is up
Operational MTU is 9180
MPLS shim interface UID is 0x2d000007
Lower interface UID is 0x0b000005
Condensed location is 0x00020000
Received:
3 packets
204 bytes
19 errors
0 discards
Sent:
0 packets
0 bytes
0 errors
0 discards
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.100
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Field Name Field Description
MPLS shim interface Type and specifier for MPLS shim interface
ATM circuit type Type of ATM circuit