Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 199

Copyright © 2010, Juniper Networks, Inc.
host1:pe1#show ip bgp 10.88.88.1
BGP route information for prefix 10.88.88.1/32
Network route (best route
Advertised to both internal and external peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is unicast
Next hop IP address is 0.0.0.0 (metric 2)
Multi-exit discriminator is 1
Local preference is not present
Weight is 32768
Origin is IGP
AS path is empty
Extended communities empty
To display information about routes for the specified IPv6 prefix:
host1:pe1#show bgp ipv6 2001:0430::1/128
BGP route information for prefix 2001:1::1/128
Received route learned from internal peer 2.2.2.2 (best route)
Route placed in IP forwarding table
Best to advertise to external peers
Address Family Identifier (AFI) is ip-v6
Subsequent Address Family Identifier (SAFI) is unicast
MPLS in-label is none
MPLS out-label is 17
Next hop IP address is ::ffff:2.2.2.2 (metric 3)
Multi-exit discriminator is 0
Local preference is 100
Weight is 0
Origin is IGP
AS path is 65021
To display information about next hop routers for VRF PE 11 in the IPv4 VPN address
family:
host1:pe1#show ip bgp vpnv4 vrf pe11 next-hops
Indirect next-hop 11.11.11.2
Resolution in IP route table of VR pe11
Reachable (metric 0)
IP indirect next-hop index 35
Direct next-hop ATM2/0.11 (11.11.11.2)
Resolution in IP tunnel-route table of VR pe11
Not reachable
Reference count is 1
Indirect next-hop 2.2.2.2
Resolution in IP route table of VR pe1
IP indirect next-hop index 123
Reachable (metric 100)
Direct next-hop POS4/0 (10.10.10.1)
POS4/1 (12.12.12.1)
Resolution in IP tunnel-route table of VR pe1
MPLS indirect next-hop index 578
Reachable (metric 100)
Direct next-hop Push 23, POS4/0 (10.10.10.1)
Push 43, POS4/1 (12.12.12.1)
Reference count is 1
To display information about routes in the route-target address family:
Chapter 2: Monitoring BGP
163