Monitoring Mpls Interfaces - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring MPLS Interfaces

Purpose
Action
348
Table 75: show mpls forwarding Output Fields (continued)
Field Name
Owner
Spoof check
Action
in pkts
in Octets
in errors
in discardPkts
show mpls forwarding
Display status and configuration information about MPLS interfaces.
To display information about all MPLS interfaces:
host1:pe1#show mpls interface
MPLS major interface ATM2/0.10
ATM circuit type is 1483 LLC encapsulation
Administrative state is enabled
Operational state is up
Operational MTU is 9180
Received:
0 packets
0 bytes
0 errors
0 discards
0 failed label lookups
Sent:
0 packets
0 bytes
0 errors
0 discards
LDP information:
10.1.1.2/24
enabled with profile 'default'
0 hello recv, 1 hello sent, 0 hello rej
0 adj setup, 0 adj deleted,
RSVP
Enabled with profile default
Authentication is disabled
Field Description
Signaling protocol that placed the label in the forwarding table:
BGP, LDP, or RSVP-TE
Type and location of spoof checking performed on the MPLS packet,
router or interface
Action taken for MPLS packets arriving with that label
Number of packets sent with the label
Number of octets sent with the label
Number of packets that are dropped for some reason before being
sent
Number of packets that are discarded due to lack of buffer space
before being sent
Copyright © 2010, Juniper Networks, Inc.