Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 320

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics
284
(Optional) Configure preemption hold or setup priority.
6.
host1(config-if)#tunnel mpls traffic-eng priority 4 4
(Optional) Configure resource class affinity.
7.
host1(config-if)#tunnel mpls traffic-eng affinity 0x000C3000 0xFFFFFFFC
This example of a masked affinity matches only links configured with attribute flags
from 0x000C3000 to 0x000C3003.
(Optional) Configure retry timer options to apply to a specific tunnel to set up an
8.
LSP after a route or setup failure.
host1(config-if)#tunnel mpls no-route retries 100
host1(config-if)#tunnel mpls no-route retry-time 45
host1(config-if)#tunnel mpls retries 250
host1(config-if)#tunnel mpls retry-time 65
(Optional) Associate a text description with the tunnel.
9.
host1(config-if)#tunnel mpls description southshore
Configure the tunnel endpoint.
10.
host1(config-if)#tunnel destination 10.12.21.5
MPLS Global Configuration Tasks on page 277
MPLS Interface Configuration Tasks on page 281
MPLS Tunnel Configuration Tasks on page 283
MPLS Tunnel Profile Configuration Tasks on page 285
Additional LDP Configuration Tasks on page 288
Additional RSVP-TE Configuration Tasks on page 293
interface tunnel
tunnel destination
tunnel mpls affinity
tunnel mpls autoroute announce
tunnel mpls autoroute metric
tunnel mpls bandwidth
tunnel mpls description
tunnel mpls no-route retries
tunnel mpls no-route retry-time
tunnel mpls path-option
tunnel mpls priority
tunnel mpls retries
tunnel mpls retry-time
Copyright © 2010, Juniper Networks, Inc.