Monitoring Vrf Interfaces - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Related Topics

Monitoring VRF Interfaces

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 94: show ip bgp next-hop Output Fields (continued)
Field Name
Metric
Number of direct next-hops
Direct next-hop
Reference count
show ip bgp next-hops
Display information about the interfaces associated with VRFs.
To display information about the interfaces associated with the specified VRFs:
host1#show ip interface vrf vpn1
null0 is up, line protocol is up
Network Protocols: IP
Internet address is 255.255.255.255/255.255.255.255
Broadcast address is 255.255.255.255
Operational MTU = 1500
Operational speed = 100000000
Discontinuity Time = 0
Router advertisement = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
atm4/0.77 is up, line protocol is up
Network Protocols: IP
Internet address is 7.8.7.7/255.255.255.0
Broadcast address is 255.255.255.255
Operational MTU = 9180
Operational speed = 155520000
Discontinuity Time = 0
Router advertisement = disabled
Administrative debounce-time = disabled
Operational debounce-time
Access routing = disabled
Multipath mode = hashed
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Policed Packets 0, Bytes 0
In Error Packets 0
In Invalid Source Address Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Field Description
Metric of the BGP indirect next hop
Number of the equal-cost legs of direct next hops that this indirect
next hop resolves to
IP interface and next-hop IP address that resolve the BGP indirect
next hop; the direct next hop can also be an IP indirect next hop or
an MPLS indirect next hop when chains of next hops are in use
Number of label mappings of BGP routes that use this next hop
Administrative MTU = 0
Administrative speed = 0
= disabled
Administrative MTU = 0
Administrative speed = 0
= disabled
Chapter 7: Monitoring BGP/MPLS VPNs
491