Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 537

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

Copyright © 2010, Juniper Networks, Inc.
Table 98: show ip vrf Output Fields (continued)
Field Name
Out Total Dropped
Packets, Bytes
Out Discarded Packets
Out Fabric Dropped
Packets
VRF
IP Statistics Rcvd
local destination
hdr errors
addr errors
unkn proto
discards
IP Statistics Frags
reasm ok
reasm req
reasm fails
frag ok
frag creates
frag fails
IP Statistics Sent
generated
no routes
discards
ICMP Statistics Rcvd
errors
dst unreach
Field Description
Total number packets and bytes dropped by an IP interface on
output
Number of packets discarded on the egress interface because of a
configuration problem rather than a problem with the packet itself
Number of packets dropped because of internal fabric congestion
Name of the VRF with which the interface is associated
Frames with this router as their destination
Number of packets containing header errors
Number of packets containing addressing errors
Number of packets received containing unknown protocols
Number of discarded packets
Number of reassembled packets
Number of requests for reassembly
Number of reassembly failures
Number of packets fragmented successfully
Number of frames requiring fragmentation
Number of packets unsuccessfully fragmented
Number of packets generated
Number of packets that could not be routed
Number of packets that could not be routed that were discarded
Number of error packets received
Number of packets received with destination unreachable
Chapter 7: Monitoring BGP/MPLS VPNs
501

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents