Monitoring Ldp-Related Settings For Vpls; Table 129: Show Ldp Vpls Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring LDP-Related Settings for VPLS

Purpose
Action
Meaning
630
Table 128: show ip bgp next-hops Output Fields (continued)
Field Name
MPLS indirect next-hop
index
Reachable
metric
Number of direct next-hops
Direct next-hop
Reference count
show ip bgp next-hops
Display MPLS configuration information for a VPLS instance that uses LDP as the signaling
protocol.
To display information for all VPLS instances configured on the virtual router:
host1:ve1#show ldp vpls
Vpls Vpls Remote
Instance Id PE
-------- ---- -------
vpls1 1 2.2.2.2
vpls2 2 2.2.2.2
Table 129 on page 630 lists the show ldp vpls command output fields.

Table 129: show ldp vpls Output Fields

Field Name
Vpls Instance
Vpls Id
Remote PE
In-label
Out-label
Field Description
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
Indicates whether or not the indirect next hop is reachable. For more
information about the reachability rules that apply for various route
types, see the command description for show ip bgp next-hops
Metric number of the BGP indirect next hop
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
MPLS next-hop index that resolves the MPLS indirect next hop
Number of label mappings of BGP routes that use this next hop
In-label Out-label
-------- ---------
25 27
26 28
Field Description
Name of the VPLS instance for which the configuration information
is displayed
Globally unique identifier for the VPLS domain
IP address of the remote VE (also known as the PE) router
Incoming MPLS label from the remote site
Outgoing MPLS label used to reach the remote site
Copyright © 2010, Juniper Networks, Inc.