Table of Contents
Advertisement
JunosE 11.2.x BGP and MPLS Configuration Guide
Meaning
Related Topics
Monitoring Virtual Router Configuration
Purpose
Action
Related Topics
328
MPLS TE administrative weight 0
MPLS TE attribute flags 0
Available BW at 8 priority levels:
0
10 kbps
1
10 kbps
2
10 kbps
3
10 kbps
4
10 kbps
5
10 kbps
6
10 kbps
7
10 kbps
Table 61 on page 328 lists the show cac interfacevc command output fields.
Table 61: show cac interface Output Fields
Field Name
bandwidth
IP/MPLS reserveable bw
current total available bw
MPLS TE flooding
threshold up/down
MPLS TE administrative
weight
MPLS TE attribute flags
Available BW at 8 priority
levels
show cac interface
Display the configuration of all virtual routers or a specific virtual router.
To display VR configuration:
host1#show configuration virtual-router euro7
show configuration
Field Description
Maximum physical bandwidth in Kbps; line rate
Total bandwidth in Kbps that can be reserved for MPLS; includes
bandwidth that is already reserved as well as bandwidth not yet
reserved
Total bandwidth in Kbps that is available to be reserved
Absolute percentages of total reservable bandwidth that trigger
the flooding of the new bandwidth value throughout the network;
flooding is triggered when bandwidth increases past any of the up
threshold values and when bandwidth decreases past any of the
down threshold values
Weight assigned to the interface that supersedes a weight assigned
by the IGP
32-bit value that assigns the interface to a resource class and
enables a tunnel to discriminate among interfaces by matching
against tunnel affinity bits
Bandwidth in Kbps that is available at each priority level in the range
0–7
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
