Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 231

Copyright © 2010, Juniper Networks, Inc.
Table 44: show ip bgp peer-group Output Fields (continued)
Field Name
BFD
BFD session
Description
Members
Default originate
Minimum transmit interval
Minimum receive interval
Multiplier
Next hop self
Peers are route reflector
clients
weight
Incoming update distribute
list
Outgoing update distribute
list
Incoming update filter list
Outgoing update filter list
Weight filter list
Incoming route map
Outgoing route map
Minimum route
advertisement interval
Configured update source
IP address
Field Description
Status of BFD configuration for the peer group (enabled or disabled)
Type and address of peer to which BFD session is established
Textual description of the BGP neighbor
Name of the peer group of which this BGP neighbor is a member
IP addresses of the members of the BGP peer group
Desired time interval between BFD packets transmitted to members
of peer group
Desired time interval between BFD packets received from members
of peer group
Number of BFD packets that can be missed before declaring BFD
session down
Status of next-hop self information for the peer group (enabled or
disabled)
BGP peer group is configured as a route reflector. This field does
not appear when route reflectors are not configured.
Neighbor weights assigned to BGP peer groups
Distribute list for incoming routes, if configured
Distribute list for outgoing routes, if configured
Update filter list for incoming routes, if configured
Update filter list for outgoing route, if configured
Weight filter list for routes, if configured
Incoming route map, if configured
Outgoing route map, if configured
Minimum time between route advertisements
IP address used when sending update messages
Chapter 2: Monitoring BGP
195